#!/bin/sh
#
# Start/stop the Bluetooth daemons
#

set -e

PATH=/sbin:/bin:/usr/sbin:/usr/bin
NAME=bluetooth
DESC="Bluetooth subsystem"

HCIATTACH_NAME=hciattach
DAEMON_NAME=hcid
HID2HCI_NAME=hid2hci
RFCOMM_NAME=rfcomm
RFCOMM_GETTY_NAME=rfcomm-getty

HCIATTACH_EXEC="`which $HCIATTACH_NAME || true`"
DAEMON_EXEC="`which $DAEMON_NAME || true`"
HID2HCI_EXEC="`which $HID2HCI_NAME || true`"
RFCOMM_EXEC="`which $RFCOMM_NAME || true`"

DAEMON_ENABLE=true
HID2HCI_ENABLE=false
RFCOMM_ENABLE=true

DAEMON_CONFIG="/etc/bluetooth/hcid.conf"
RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"

RFCOMM_GETTY=/etc/bluetooth/rfcomm/rfcomm-getty

HCIATTACH_ENABLE=true
HCIATTACH_TTY=ttyS1
HCIATTACH_TYPE=gumstix
HCIATTACH_START_SPEED=57600
HCIATTACH_SPEED=921600
HCIATTACH_HANDSHAKE=flow

[ -e /etc/default/bluetooth ] && . /etc/default/bluetooth

case "$1" in
  start)

	echo -n "Starting 32kHz clock..."
	/usr/sbin/pxaregs OSCC_OON 1
	while /usr/sbin/pxaregs OSCC_OOK | tail -n 1 | grep -q -v 1;do
		echo -n '.'
		sleep 1
	done
	echo "Settled"

	/sbin/modprobe gumstix_bluetooth
	/sbin/modprobe proc_gpio
                                                                      
  echo "AF1 in" >/proc/gpio/GPIO42                              
  echo "AF2 out" >/proc/gpio/GPIO43                             
  echo "AF1 in" >/proc/gpio/GPIO44                              
  echo "AF2 out" >/proc/gpio/GPIO45  

	echo -n "Starting $DESC:"
	if $HCIATTACH_ENABLE && [ -x "$HCIATTACH_EXEC" ] ; then
		$HCIATTACH_EXEC -s $HCIATTACH_START_SPEED $HCIATTACH_TTY $HCIATTACH_TYPE $HCIATTACH_SPEED $HCIATTACH_HANDSHAKE
		echo -n " $HCIATTACH_TTY"
	fi
	if $DAEMON_ENABLE && [ -x "$DAEMON_EXEC" ] && [ -f "$DAEMON_CONFIG" ] ; then
		$DAEMON_EXEC -s -f $DAEMON_CONFIG
		echo -n " $DAEMON_NAME"
	fi
	if $HID2HCI_ENABLE && [ -x "$HID2HCI_EXEC" ] ; then
		$HID2HCI_EXEC --tohci > /dev/null 2>&1 || true
		echo -n " $HID2HCI_NAME"
	fi
	if $RFCOMM_ENABLE && [ -x "$RFCOMM_EXEC" -a -f "$RFCOMM_CONFIG" ] ; then
    sleep 1		
    /usr/bin/sdptool add --channel=1 SP > /dev/null
    rfcomm -r watch 0 1 /sbin/getty -w -L rfcomm0 115200 vt100 &
#		$RFCOMM_EXEC -r -f $RFCOMM_CONFIG watch all > /dev/null 2>&1 &
#		$RFCOMM_GETTY > /dev/null 2>&1 &
		echo -n " $RFCOMM_NAME"
	fi
	echo "."
	;;
  stop)
	echo -n "Stopping $DESC:"
	killall $RFCOMM_NAME > /dev/null 2>&1 || true
	echo -n " $RFCOMM_NAME"
	killall $HID2HCI_NAME > /dev/null 2>&1 || true
	echo -n " $HID2HCI_NAME"
	killall $DAEMON_NAME > /dev/null 2>&1 || true
	echo -n " $DAEMON_NAME"
	killall $HCIATTACH_NAME > /dev/null 2>&1 || true
	echo -n " $HCIATTACH_NAME"
	echo "."
	;;
  *)
	N=/etc/init.d/$NAME
	echo "Usage: $N {start|stop}" >&2
	exit 1
	;;
esac

exit 0